• SDSN - Greece
• Open Access close
• Energy Research close

OBREC is the acronym that stands for Overtopping Breakwater for Energy Conversion. It is a multifunctional device aimed to produce energy from the waves, while keeping the harbour area protected from flooding. In this paper, the inclusions of a berm to reduce wave reflection, the shape of the sloping plate to maximise wave overtopping and the reservoir width and the crown wall shape to maximise wave energy capture while keeping the harbour safety were analysed to optimize the hydraulic and structural performances of the device. Several configurations were numerically investigated by means of a 2DV RANS-VOF code to extend the results already obtained during previous experimental campaigns. The wave reflection coefficient, the average wave overtopping flows and the wave loadings along the structure are computed, compared with existing formulae and discussed with reference to the OBREC prototype installed in the Port of Naples.

AbstractIn this paper, we introduce and test a framework to qualitatively assess the environmental impact of climate adaptation innovations with the ambition to facilitate the implementation of these adaptations. The framework was designed to enable continuous environmentally conscious benchmarking based on three environmental performance indicators: sustainable design, environmental impact and ecological impact. It was pilot tested by uninvolved experts and key-persons for two large-scale nature-based flood adaptation innovations in the Netherlands and discussed with environmental assessment professionals. Our findings indicate how the inclusion of our framework helps to identify important knowledge gaps regarding environmental co-benefits and trade-offs, and can be beneficial to both those developing the innovation and the local authorities charged with assessing the suitability of innovations. We conclude by noting how the incorporation of environmental impact assessment from the design stage of adaptations could supplement existing environmental assessment regulations pre-empting concerns rather than reacting to them.

Report on implementation and validation protocol for EGS and SHGSA (M34). This report will conclude WP5 activities, retrieving all the results achieved in Task 5.1, 5.2, 5.3, 5.4 and defining a protocol, i.e. a set of procedures to be followed for data integration in geothermal exploration of EGS and SHSG. The report will describe the protocol, and its application in two fields EGS and SHSG in Mexico and two fields EGS and SHSG to be chosen among Europe, Indonesia and Africa. Its rate of success in the 4 proposed areas will be critically discussed.

In future power systems, widespread small-scale energy storage systems (ESSs) can be aggregated to provide ancillary services. In this context, a new load frequency control scheme which incorporates the energy storage aggregator (ESA) and its associated disturbance observer is proposed. The disturbance observer is designed to supplement the secondary frequency control for the ESA, therefore the system frequency response and recovery can be improved. Within the ESA, a finite-time leader-follower consensus algorithm is proposed to control the small-scale ESSs via sparse communication networks. This algorithm ensures that the ESA tracks the frequency control signals, while the state-of-charge among each ESS is balanced in finite-time. The external characteristics of the ESA will resemble to that of one large-scale ESS. Numerical examples demonstrate the convergence of the ESA under different communication graphs. The effectiveness of the entire scheme for power system frequency control is validated under a variety of scenarios that include contingency and normal operation. NRF (Natl Research Foundation, S’pore)

The purpose of this document is to establish a framework for the analysis of Multi-Use (MU) in the sea basin context, which will provide the project consortium with the practical research tools necessary to examine theoretical understanding and practical experience related to MU. This framework will guide further analyses and also feed into Work Package (WP) 3 - Case Study Analysis. For this specific purpose, this analytical framework (AF) will be considered in the preparation of the Case Study Methodology (D3.1), aiming at maximizing the degree of commonality between the two scales of analysis (Sea Basin scale and local scale). The analytical framework is intended to guide the process of information and data gathering and stakeholder engagement, providing the needed degree of homogeneity to the analysis of different Sea Basins. The framework should be interpreted as a flexible tool, and it may be modified and adapted through the implementation process, according to the emerging needs. In the event of changes or additions to the framework described herein being encountered, a technical note will be prepared by the WP2 leader, describing the amendments to the methodology. After WP2 completion, a revised version of this framework will be prepared, incorporating all changes.

Highly efficient cogeneration and district heating systems have a significant potential for primary energy savings and the reduction of greenhouse gas emissions through the utilization of a waste heat and renewable energy sources. These potentials are still highly underutilized in most European countries. They also play a key role in the planning of future energy systems due to their positive impact on the increase of integration of intermittent renewable energy sources, for example wind and solar in a combination with power to heat technologies. In order to ensure optimal levels of district heating penetration into an energy system, a comprehensive analysis is necessary to determine the actual demands and the potential energy supply. Economical analysis of the grid expansion by using the GIS based mapping methods hasn’t been demonstrated so far. This paper presents a heat demand mapping methodology and the use of its output for the district heating network expansion analysis. The result are showing that more than 59% of the heat demand could be covered by the district heating in the city of Velika Gorica, which is two times more than the present share. The most important reason of the district heating's unfulfilled potential is already existing natural gas infrastructure.

Abstract The aim of this work is to analyze the performance of the Overtopping Breakwater for Energy Conversion (OBREC), developed by the team of the University of Campania and installed at prototype scale in the port of Naples. It is a multifunctional coastal structure aimed to protect harbors and produce energy, based on the overtopping principle. This device has been preliminary analyzed by means of experimental and numerical investigations. This contribution provides for the first time an integrated assessment of the OBREC hydraulic and structural performance, by means of the measurements collected at the prototype installation and of numerical modelling i.e. methodologies not affected by the scale effects. The numerical model, developed in the openFOAM environment, is calibrated on the field data gathered during a storm event and is then applied to extend the information related to the OBREC response under the typical wave climate. The results obtained are proposed in terms of overtopping discharge rates and pressures acting along the OBREC profile, under several sea states. Based on these results some recommendations and indications regarding the optimal cross section design are given to maximize the energy production, without compromising the structural stability, and to promote the device exploitability.

Abstract Microclimate change related events affect cities total environment and therefore citizens’ wellbeing. In a framework of urban resilience challenge, it is important to guarantee thermally comfortable conditions to dwellers in outdoors but also to preserve cultural heritage masterpieces for tourism and local socio-cultural identity. This work couples an innovative field monitoring at multiple scales and a validated numerical modelling effort to identify indoor and outdoor critical conditions at the present time and in the future, according to IPCC climate change forecast scenarios. The authors focused the attention on the overheating risk of Gubbio historical city center, in central Italy. Experimental data analysis highlights the microclimate granularity of the case study with detected temperature discrepancies up to 2.5 °C observed at pedestrian height during the hottest hour, i.e. 2p.m. Collected data are then used to validate the numerical models of (i) the most significant building of the city and (ii) its surroundings to investigate indoor/outdoor thermal comfort stress due to climate change and local overheating. The combined analysis shows that indoor operative temperature reaches 32 °C on average in 80 years, compared to the current 29 °C value. In the outdoors, apparent temperature increases by about 10 °C on 2100, being responsible for a serious threat compromising socio-cultural life, human health and outdoor and recreational activities.

This poster presents the SET-Nav project model linkage and the SET-Nav case studies which will produce the SET-Nav pathways in order to support the SET-Plan implementation.